 This photo shows the integral base cone support and drain valve detail. Note the thick, wide, pre-drilled flange base. Drain valve has 2" pipe adapter.
|
This picture shows the external detail of the tangential feed port. A 4" pipe adapter is provided and pre installed. Further view of base cone support shown. |
This photo shows an internal view of the tangential feed port where it meets the circular wall inside the chamber. |
This photo shows a bottom view of the vortex units. The drain pipe enters the bottom of the cone directly in the center of the bottom of the cone. The drain line pipe interface with the cone floor bottom is flush. A 1 1/2" line creates a high velocity waste exit rate which aids in fast waste removal and reduces water usage. Other brands of vortex units currently available in the US do not have this feature. |
