Home | Product Index | Pond Products | Fountains | Articles | Gallery | Garden | Shipping |View Cart

Air Pumps, Aeration, Diffuser

Aeration Kits

Air Pumps

Air Blowers

Air Stones

Air Blower Manifold

Air Tubing

Air Diffuser

 

Teton Dynamics Aeration Kit

   
Kit Model

Diaphram Air Pump

Weighted Air Hose Air Stones
Membrane Diffusers
Plumbing Kit    
XAFS
1
20'
1
 
Plumbing Kit
249.00 [Buy]
XAFM
1
40'
2
 
Valve/Plumbing Kit
285.00 [Buy]
XAFL
1
50'
2
Valve/Plumbing Kit
750.00
[Buy]
XAFXL
1
100'
2
Valve/Plumbing Kit
895.00 [Buy]

Hakko Air Pumps

Long Life Expectancy
Silent Operation
High Efficiency
Simple Maintenance
Completely Oil-Free
Overload Protection
18 month Warrantee

Low Power Consumption
Motor & pump parts built in one case 
Guarantees a dry & pure air flow
Auto switch off/on if >120F / <120F

 

Air output L/min
 
HK25L  Hakko Air Pump; 115 v. 25 179.00  [Buy]
HK40L  Hakko Air Pump; 115 v. 40 249.00  [Buy]
HK60L  Hakko Air Pump; 115 v.  60 315.00  [Buy]
HK80L  Hakko Air Pump; 115 v.  80    [Buy]
HK100L  Hakko Air Pump; 115 v. 100    [Buy]
HK120L  Hakko Air Pump; 115 v. 120    [Buy]

   230 volt Hakko Air Pumps available, please call 707 642 7663


HK40L
HK60L
HK80L
HK100L
HK120L

Power Supply Frequency (HZ)

50/60

50/60

50/60

50/60

50/60

Normal Pressure Bar

0.13 (1.85 psi)

0.15 (2.13 psi)

0.15 (2.13 psi)

0.18 (2.56 psi)

0.20 (2.84 psi)

Rated Performance lpm (cfm)

51

68

86

105

121

Power (watts)

40

63

85

116

126

Noise Level (db)

35

38

38

40

42

Closed Pressure / Bar

0.38

0.46

0.54

0.45

0.54

Closed Pressure / Psi

5.5

6.7

7.8

6.5

7.8

Weight (kg)

5.4 / 11.9

6.3 / 13.8

6.3 / 13.8

8.9 / 19.6

8.9 / 19.6

Danner Air Pumps

  Air Output cu. in. / min.     
 AP20 Danner Air Pump        1700  119.00   [Buy]
 AP40  Danner Air Pump        2900  155.00   [Buy]

Santana Air Stones

AS-325
1-1/2” Square X 3” airstone 1/4” Barb
19.00
AS-650
1-1/2” Square X 6” airstone 1/2” Mpt
29.00
AS-950
1-1/2” Square X 9” airstone 1/2”Mpt
43.00
AS-1250
1-1/2” Square X 12” airstone 1/2” Mpt
49.00
AST20
2” Sphere Air Stone
9.50
AL106
1-1/2” Square X 3” airstone 1/4” Barb
19.00
FA1214 1/2" FPT x 1/4" Barbed Adpt.
5.00

Air Hose (Self Weighted)

WAH3825
3/8" x 25' Air Hose
59.00
WAH38
3/8" x 50' Air Hose
79.00
WAH12
1/2" x 100' Air Hose
189.00
WAH58
5/8" x 100' Air Hose
209.00
WAH34
3/4" x 100' Air Hose
289.00
Sale Price
WAH12F 1/2" by the ft.
1.25/ft.

Black Vinyl Air Line Tubing

1058B
Black Vinyl Air Line Tubing; 5/8" dia. x 100'
56.00

 

9" Disc Diffuser

Can be adapted to fit a Tetra bottom drain (with some modifications), Aqua Art Retro-Drains or the 4" spin drain.

FlexAir™ disc diffuser bodies are made of high-strength polypropylene with 3/4" MNPT

Diffuser has a minimum of 6,600 engineered air release orifices. Special design of the EPDM membrane with its engineered thickness taper, results in full utilization of the membrane surface, even at low airflow operations.
The disc diffuser has an integral "triple" check valve to prevent fluid backflow.
Normal airflow range is 0-5 cfm. Resistance is about 10" H20 when clean.
Disc diffusers have fine bubble EPDM membranes.
Medium, coarse and coarse/fine combination membranes are also available.
D195 9" Disc Air Diffuser: Fine bubbles
49.75
 [Buy]

Air Blower Manifold

Air blower manifolds are useful when mounted under traditional non-pressurized gravel or even more contemporary (eg. Matala) media beds.

Typically mounted directly under (using large zip ties) false bottom media grates (in the case of gravel) or under PVC pipe support frames (in the case of Matala)

Air manifolds fluidize media and dislodge bacterial mulm from the media for easier removal via filter bottom drain.

Provide us with filter dimensions and we can provide you with spec’s for you to fabricate yourself.

Use blowers listed below; alternative is a 12 gallon or larger wet vac discharge port to drive the manifold.

Typical shop air compressors (high p.s.i.) are not the correct type of air drive for this use. High CFM is what is needed, along with oiless air source

AMX30
Air Blower Manifold...Call us for fabrication prices 707 853 0118
AMX15
Provide us with filter dimensions and we can provide you with spec’s for you to fabricate yourself.    Call 707 853 0118

Air Blower:

Use with biological filters using 2" PVC blower manifolds.
Blower & perforated PVC air blower manifold systems (See above) are typically used under gravel media masses to fluidize media beds
This agitation breaks up clogged gravel media. As a result, one never needs to completely break down this heavy media bed to clean.
This air blower is NOT intended for use as a constant pond aeration

 S823  Air Blower: 1 h.p.; 115 VAC; bottom port; Weather switch box and rubber rain lip   249.00 [Buy]
 S823A  Air Blower: 2 h.p.; 115 VAC; bottom port; Weather switch box and rubber rain lip   289.00 [Buy]


(V291 Below)
This spring check valve is intended for use on air blowers for pressurized bio filters with poly bead media or conventional gravel bed (non-pressurized). Not to be used for water filter/ plumbing on pond systems, only for use wih air. Non pond applications with potable water is fine. 1 1/2” pipe glues into slip socket. 2” fitting glues to the outside (O.D. spigot) diameter of the fitting. 1/4 pound pressure opens valve.

V291
1 1/2"/2" Spring Check Valve, Clear
12.75
[Buy]

Top of the Aeration page